What detection methods are required for plain wire mesh?

Plain weave steel wire mesh is plain weave, its weaving wire diameter is the same thickness as warp and weft wire, and each diameter wire crosses each other and passes through each weft wire up and down, and at the same time, the warp and weft wires are formed at 90 degrees, so that the mesh surface is formed. It can be firm and not deformed without welding.

First of all, the wire diameter of stainless steel wire mesh cannot be greatly different, and must be within the error range;

Second, the processing workers must measure 5 meters when weaving stainless steel wire mesh (measure the mesh number of stainless steel wire mesh and the width of stainless steel wire mesh);

Third, when the woven stainless steel wire mesh reaches the required number of meters, it should be cut by 30 cm more to ensure that the number of meters;

Fourth, the woven mesh manufacturer must inspect each roll of 304 stainless steel wire mesh belt and 316 stainless steel wire mesh that is put into storage, and mark the material of the stainless steel wire mesh and the weight of the stainless steel wire mesh.

The weaving methods of stainless steel wire mesh include plain weave, twill weave, dense weave, mat-type mesh twill weave, double wire Dutch weave, etc.